I've just repowered my old fibreglass boat with a 2002 115hp outboard.
The motor starts and runs well but the ignition switch won't turn it off. Removing the clip on the emergency stop doesn't not stop either.
Black earth wire is good , red wire 12v , yellow switched 12v. White has 2.5v ignition off zero volt ignition on. White feeds the kill switch, with black on the other side.
Thanks in advance for anyone's thoughts before I replace the ignition switch .
The motor starts and runs well but the ignition switch won't turn it off. Removing the clip on the emergency stop doesn't not stop either.
Black earth wire is good , red wire 12v , yellow switched 12v. White has 2.5v ignition off zero volt ignition on. White feeds the kill switch, with black on the other side.
Thanks in advance for anyone's thoughts before I replace the ignition switch .
Yamaha outboard motor ignition
0 commentaires:
Enregistrer un commentaire